Dell PowerEdge C6220 II - Page 131

Using the System Setup Program | 131
Token
Setup option
Description
4823
Memory
Frequency
Detects the memory running speed from H/W designed
(SPD, memory population).
4824
Memory
Frequency
Sets memory running speed ups to 800MHz.
4825
Memory
Frequency
Sets memory running speed ups to 1066MHz.
4826
Memory
Frequency
Sets memory running speed ups to 1333MHz.
4827
Memory
Frequency
Sets memory running speed ups to 1600MHz.
4960
Memory
Frequency
Sets memory running speed ups to 1866MHz.
4828
Memory
Throttling Mode
Sets memory running as Open Loop Throughput
Throttling (OLTT) (Default).
4829
Memory
Throttling Mode
Sets memory running as Closed Loop Thermal Throttling
(CLTT).
482A
DRAM
Scrubbing
Disables Dram scrubbing is the ability to write corrected
data back to the memory once a correctable error is
detected on a read transaction.
482B
DRAM
Scrubbing
Enables Dram scrubbing is the ability to write corrected
data back to the memory once a correctable error is
detected on a read transaction.
482C
Demand
Scrubbing
Disables Demand scrubbing is the ability to write
corrected data back to the memory once a correctable
error is detected on a read transaction.
482D
Demand
Scrubbing
Enables Demand scrubbing is the ability to write
corrected data back to the memory once a correctable
error is detected on a read transaction.
482E
Patrol Scrubbing
Disables Patrol scrubbing proactively searches the system
memory, repairing correctable errors.
482F
Patrol Scrubbing
Enables Patrol scrubbing proactively searches the system
memory, repairing correctable errors.