Dell PowerEdge R960 - Chapter 8: Upgrade Kits; BOSS-N1 Module Kit

Upgrade Kits
The table lists the available After Point Of Sale [APOS] kits.
Table 88. Upgrade kits
Kits Related links to service instructions
Bezel See Installing the front bezel
M.2 NVMe SSD See Installing the M.2 NVMe SSD module
BOSS-N1 See Installing the BOSS-N1 controller card module
GPU See GPU and also see the document included with the GPU cable kit.
Drives See Installing the drive
Memory See Installing a memory module
PERC See Installing the rear mounting front PERC module
Network cards (Standard PCIe adapter
LP/FH)
See Installing the LOM card and rear I/O board
Network cards (OCP) See Installing the OCP card
PCIe SSD card See Installing the drive
Power cords Offered, but without special service instructions
Power supplies See Installing a power supply unit
Quick sync Offered, but without special service instructions
TPM See Upgrading the Trusted Platform Module
Processor enablement thermal kits See Installing the processor
Serial COM port See Installing the serial COM port
Cables Offered, but without special service instructions
Heat sink See Installing a processor heat sink module
Risers Not available as APOS kits, upgrades offered only with the "Basic Deployment
Upgrade of Dell Server" service.
Rail Offered, but without special service instructions
Cable Management Arm (CMA) Offered, but without special service instructions
Topics:
• BOSS-N1 module kit
• Serial COM port kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 NVMe SSDs.
Before you begin the installation or removal process, follow the safety guidelines and before working inside the system
instructions.
8
Upgrade Kits 205