Dell PowerEdge R960 - Installing the GPU Air Shroud

Figure 42. Removing the GPU air shroud
Next steps
1. Replace the GPU air shroud.
Installing the GPU air shroud
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the support bar.
4. Remove the air shroud top cover.
5. Remove the cooling fan cage assembly.
6. Remove the full length expansion card risers.
Steps
1. Align the tabs on the GPU air shroud with the slots on the system.
2. Lower the GPU air shroud, until it is firmly seated and secured into the system slots.
82
Installing and removing system components