Processor specifications
Table 8. PowerEdge R960 processor specifications
Supported processor Number of processors supported
4
th
Gen Intel® Xeon® Scalable Processors Up to four
PSU specifications
The PowerEdge R960 system supports up to four AC or DC power supply units (PSUs).
Table 9. PSU specifications
PSU Class Heat
dissipation
(maximum)
(BTU/hr)
Frequency
(Hz)
Voltage AC DC Current
(A)
High line
wattage (200
—240 V AC)
Low line
wattage (100
—120 V AC)
1100 W
mixed
mode
Titanium 4100
50/60
100—240 V
AC
1100 W 1050 W N/A 12—6.3
N/A 4100 N/A 240 V DC N/A N/A 1100 W 5.2
1400 W
mixed
mode
Platinum 5250
50/60
100—240 V
AC
1400 W 1050 W N/A 12—8
N/A 5250 N/A 240 V DC N/A N/A 1400 W 6.6
1800 W
mixed
mode
Titanium 6750
50/60
200—240 V
AC
1800 N/A N/A 10
N/A 6750 N/A 240 V DC N/A N/A 1800 W 8.2
2400 W
mixed
mode
Platinum 9000
50/60
100—240 V
AC
2400 W 1400 W N/A 16—13.5
N/A 9000 N/A 240 V DC N/A N/A 2400 W 11.2
2800 W
mixed
mode
Titanium 10500
50/60
200—240 V
AC
2800 W N/A N/A 15.6
N/A 10500 N/A 240 V DC N/A N/A 2800 W 13.6
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Enterprise Infrastructure Planning Tool available at Dell.com/calc.
NOTE: If a system with AC 2400 W PSUs operates at low line 100-120 Vac, then the power rating per PSU is degraded to
1400 W.
NOTE: If a system with AC 1400 W or 1100 W PSUs operates at low line 100-120 Vac, then the power rating per PSU is
degraded to 1050 W.
Figure 25. PSU power cords
26
Technical specifications
To Next Page
Loading...
