Dell PowerEdge T360 - Page 14

Table 3. Features available at the rear of the system(continued)
Item Ports, panels, or slots Icon Description
iDRAC and to access BIOS
using the step-through mode.
When pressed, the system ID
LED in the back panel blinks
until either the front or rear
button is pressed again. Press
the button to toggle between
on or off mode.
6 NIC port (2) The NIC ports that are
integrated on the LOM card
provide network connectivity
which is connected to the
system board.
7 USB 3.2 port Supports USB 3.2 compliant
devices.
8 NIC port (1) The NIC ports that are
integrated on the LOM card
provide network connectivity
which is connected to the
system board.
9 USB 2.0 port Supports USB 2.0 compliant
devices.
10 Dedicated iDRAC Ethernet
port
Enables you to remotely
access iDRAC. For more
information, see the
Integrated Dell Remote
Access Controller User's
Guide at www.dell.com/
poweredgemanuals.
11 VGA port Enables you to connect a
display device to the system.
12 Serial port Enables you to connect a
serial device to the system.
14 Dell PowerEdge T360 system overview