Table 1. Features available on the front view of Front Accessed configuration(continued)
Item Ports, panels, or slots Icon Description
Enables you to remotely
access iDRAC. For
more information, see
the iDRAC User’s
Guide at www.dell.com/
poweredgemanuals.
4 Optional OCP 3.0 N/A The OCP NIC card supports
OCP 3.0. The NIC ports are
integrated on the OCP card
which is connected to the
OCP riser.
5 PCIe expansion card riser 3
(slot 1 and 2)
N/A Enables you to connect PCIe
expansion card installed on
riser 3
6 Power supply unit (PSU1 and
PSU2)
Indicates the PSU1 or primary
PSU.
7
Mini Express Service Tag
(MEST)
N/A The Mini Express Service Tag
(MEST) is a sticker on the
metal plate that contains the
system service tag.
8
4 x 25 GbE LOM ports N/A Provides network connectivity
and can also be shared with
iDRAC when iDRAC network
settings is set to shared
mode.
9 Serial port Enables you to connect a
serial device to the system.
NOTE: The serial port is
a micro USB type port.
It only supports serial
connection functions.
The serial port does
not support any USB
functions.
10 Mini-DisplayPort Enables you to connect a
display device to the system.
11 USB 3.0 port This port is USB 3.0-
compliant.
12 RJ45 Dry Input N/A It is a RJ-45 Dry Input port.
Enhance penetration in IoT
space. These are interruptible
inputs to iDRAC. Dry means
no energy is supplied to the
contacts.
13 System identification button Press the system ID button:
● To locate a particular
system within a rack.
● To turn the system ID on
or off.
To reset iDRAC, press and
hold the button for more than
16 seconds.
NOTE:
10 PowerEdge XR5610 system configurations and features
To Next Page
Loading...
