PowerEdge XR5610 system configurations
and features
The PowerEdge XR5610 system is a 1U server that supports:
● Rear Accessed configuration or Front Accessed configuration
● One Intel Xeon Scalable and Edge-Enhanced processor with up to 32 cores
● 8 DDR5 DIMM slots
● Two redundant AC or DC power supply units
● Up to 4 x 2.5-inch SAS, SATA, or NVMe SSD drives
NOTE: The Rear Accessed and Front Accessed configurations cannot be modified into the other configuration.
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all products > Infrastructure > Data Center
Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Select This
Product > Documentation > Manuals and Documents.
NOTE: All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
NOTE: Only use certified Optical Fiber Transceiver Class | Laser Products.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
Topics:
• System configurations - front view for PowerEdge XR5610
• System configurations - rear view for PowerEdge XR5610
• Bezel view
• Status LED control panel
• Power button control panel
• System configurations - inside view for PowerEdge XR5610
• Locating the Express Service Code and Service Tag
• System information labels
• Rail sizing and rack compatibility matrix
2
8 PowerEdge XR5610 system configurations and features
To Next Page
Loading...
