Figure 28. Dry input connection diagram
The 7 dry inputs are interruptible inputs to iDRAC.They have the following characteristics:
● Monitored by iDRAC for state transition and LC event will be logged for each state transition.
● NOT modeled as IPMI sensors but LC event only sensors. The current state of the input is not monitored or displayed
anywhere.
● Event Log - transitions (Open to close or close to Open) will be logged in LC only.
Table 22. Proposed EEMI messages
Message ID Message RRA DD Severity
DCI1000 Dry input <input index>
is transitioned to Open
state.
None. None Severity -3 (Info)
DCI1001 Dry input <input index>
is transitioned to Close
state.
None. None Severity -3 (Info)
NIC port specifications
The PowerEdge XR5610 system supports 4 embedded LOM ports that provide 4 x 25 GbE SFP28.
There is also a dedicated iDRAC management port that supports 1GbE.
Table 23. Network port specifications
Feature Specifications
LOM 10 GbE, 25 GbE
NOTE: Lowest connection speed for LOM is 10 GbE.
RJ45 for iDRAC 1 GbE
OCP card (3.0) 1 GbE, 10 GbE, 25 GbE
NOTE: The system allows either NIC card or OCP card or both to be installed in the system.
36 Technical specifications
To Next Page
Loading...
