System health and system ID indicator codes
The system health and system ID indicator is located on the system for Rear Accessed configuration and control panel of the
system for Front Accessed configuration.
Figure 152. System health and system ID indicator
Table 109. System health and system ID indicator codes
System health and system
ID indicator code
Condition
Solid blue Indicates that the system is powered on, is healthy, and system ID mode is not active. Press
the system health and system ID button to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem persists, see the Getting help
section.
System diagnostics and indicator codes 173
To Next Page
Loading...
