Dell PowerEdge XR5610 - Page 140

For information about the cable management arm, see the system’s rack documentation at https://www.dell.com/
poweredgemanuals.
NOTE: The PowerEdge XR5610 has two types of Power Supply Units (PSUs). The PSUs with black straps are designed for
Rear Accessed configuration while the PSUs with blue straps are designed for Front Accessed configuration.
Steps
Press the orange release latch, and holding the PSU handle slide the PSU out of the PSU bay.
Figure 114. Removing a power supply unit from Rear Accessed configuration
Figure 115. Removing a power supply unit from Front Accessed configuration
Next steps
Replace the PSU or replace the PSU blank.
140
Installing and removing system components