Adding and Replacing Parts 213
Replacing the Display Latch
1
Replace the spring that attaches the latch to the display panel.
2
Align the latch with the display panel and slide the latch to the left to
secure it into place.
Coin-Cell Battery
Removing the Coin-Cell Battery
CAUTION: Before you begin the following procedure, follow the safety
instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
1 spring 2 display latch
2
1
book.book Page 213 Tuesday, August 28, 2007 10:20 AM
To Next Page
Loading...
