104 |Scan To
Pages
Both Pages
Scans both pages in page order.
Left Page Only
Scans the left page only in page order. You can select this option when Left to Right
or Right to Left is selected.
Right Page Only
Scans the right page only in page order. You can select this option when Left to Right
or Right to Left is selected.
Top Page Only
Scans the top page only in page order. You can select this option when Top to Bottom
is selected.
Bottom Page Only
Scans the bottom page only in page order. You can select this option when Top to
Bottom is selected.
Binding Edge Erase
Erases the shadow from the center section of the document. You can specify the binding
erase width in the range from 0 to 50 mm in 1 mm increments, when Mode is set to other
than Off.
If File Already Exists
When using the Scan To service, you can set the action to be taken when the file name
conflicts with another file stored in the destination.
Append a Number
Automatically changes the file name by appending a number (001 - 999) to the file name,
and saves the file.
Append Date & Time
Automatically changes the file name by appending the system date and time to the file
name, and saves the file.
The date and time is formatted in YYYYMMDDHHMMSS format and proceeded by an
underscore.
Overwrite Existing File
Replaces the existing file with the new one.
Do Not Save
Cancels the job without saving the file.
To Next Page
Loading...
