Wi-Fi Direct Problems | 439
Wi-Fi Direct Problems
Problem Action
The mobile device cannot discover the
printer.
The printer may be connected to another device via Wi-Fi
Direct. Disconnect the printer and the device. See
"Disconnecting Wi-Fi Direct Network".
The printer cannot disconnect from the
device even when the procedure in
"Disconnecting Wi-Fi Direct Network" has
been performed.
Ensure that the release lever is properly positioned.
The device may be automatically reconnecting to the printer.
Reset the passphrase for Wi-Fi Direct and disconnect the
device.
The network mode of the printer cannot be
set to the Ad-hoc mode.
Ensure that Wi-Fi Direct is set to Disable.
Wi-Fi Direct cannot be set to Enable. Ensure that the network mode is set to the Infrastructure
mode.
Ensure that the IP mode is set to other than IPv6.
To Next Page
Loading...
