Setting the IP Address | 43
Verifying the IP Settings
You can confirm the settings by using the control panel or printing the configuration
report.
Verifying the IPv4 Settings Using Control Panel
1 Press the button.
2 Tap DeviceJAbout.
3 Verify the IP address displayed in IPv4: under Network.
Verifying the IPv4 Settings Using Configuration Report
1 Print the configuration report.
2 Verify the correct IPv4 IP address, subnet mask and gateway address are listed in the
configuration report.
If the IP address shows 0.0.0.0 (the factory default), an IP address has not been
assigned. To assign one for your printer, see "Assigning an IPv4 Address Using the
Control Panel".
To Next Page
Loading...
