Dell S3845cdn - Page 156

156 | Dell Printer Configuration Web Tool
Subnet Mask
Enter the subnet mask when selecting STATIC at Mode.
NOTE:
• Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
• Specify a subnet mask using numbers (0 to 9) and periods (.).
Gateway Address
Enter the gateway address when selecting STATIC at Mode.
NOTE:
• Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
• Specify a gateway address using numbers (0 to 9) and periods (.).
Release current IP when the Device is powered off.
For DHCP, select this to return the IP address to the DHCP server when the printer is
powered off.
IPv6
Click Edit for the settings.
Link-Local Address
Displays the Link-Local address.
Self-Assigned Address 1:, Self-Assigned Address 2:, Self-Assigned Address 3:
Displays the self-assigned address.
DHCPv6
Purpose
Select a purpose of using DHCPv6.
• Directed by Router
• Address Assignment and Configuration Data
• Configuration Data
DHCPv6 Address:
Displays the DHCPv6 address.
Manual Address:
Allows you to select whether or not to configure the IPv6-address settings manually.
Manual Address
Enter an Address.
NOTE:
• Enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
• Specify an address using alphanumeric characters (0 to 9 and A to F) and colons (:).