Dell S3845cdn - Page 200

200 | Dell Printer Configuration Web Tool
Lines per Page
Specifies the number of lines on page.
CR=CR, LF=CR+LF, FF=CR+FF
Sets line termination processing.
•Off
The line termination command is not added.
•On
The LF/FF command is added.
CR+LF/CR+FF
CR=CR, LF=CR+LF, FF=CR+FF
Sets line termination processing.
•Off
The line termination command is not added.
•On
The CR command is added.
CR+LF
Hex Dump
Specifies whether to enable the Hex Dump feature, which helps to isolate the source of a
print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Image Enhancement
Specifies whether to enable the Image Enhancement feature, which makes the boundary
line between black and white smoother to decrease jagged edges and enhance the visual
appearance.
PostScript®
Use the PostScript® menu to change printer settings that only affect jobs using the
PostScript 3 emulation printer language.
Print Error Sheet
Specifies whether to print the contents of the errors concerning PostScript Compatible
page description language.
Paper Supply
Specifies the way to select the tray for PostScript mode.
Auto Select The tray is selected as the same setting as in the PCL mode.
PostScript Tray Setting The tray is selected in a method compatible with regular PostScript
printers.