Dell S3845cdn - Page 246

246 | Scanning
Destination Computer
One of the following operating systems must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.
• Microsoft Windows Server 2008 R2
• Microsoft Windows Server 2012 R2
• Microsoft Windows Server 2016
• Microsoft Windows Vista
• Microsoft Windows 7
• Microsoft Windows 8.1
• Microsoft Windows 10
• Mac OS X 10.7 Lion
• OS X 10.8 Mountain Lion
• OS X 10.9 Mavericks
• OS X 10.10 Yosemite
• OS X 10.11 El Capitan
• macOS 10.12 Sierra
Step 2 Enabling SMB Port and Setting up TCP/IP
To use the My Folder service, enable the SMB port and set the IP address.
NOTE:
• You can configure the settings using Dell Printer Configuration Web Tool.
Step 3 Configuring Remote Authentication
Set the Login Method to Network.
NOTE:
• You can configure the settings using Dell Printer Configuration Web Tool.
Step 4 Configuring My Folder
Configure the My Folder settings using Dell Printer Configuration Web Tool.
NOTE:
• See "My Folder".
Step 5 Configuration on the Computer
Create a destination folder on your computer and set it as a shared folder, and then set
write rights on the folder.
NOTE:
• To use SMB on Mac OS X, set Windows Sharing to On in the Service tab of Sharing under System
Preferences.
Scanning Procedure
1 Load the document(s).
NOTE:
• See "Loading Documents".
2 Press the button.