Dell S3845cdn - Page 285

E-mail Environment Settings | 285
4 Set an IP address and the other addresses.
Skip this step if an IP address is already set.
If DHCP is available in your environment, configure the method for obtaining the
address. If an IP address cannot be obtained automatically or manual configuration is
preferred, confirm the settings of an IP address, a subnet mask, and a gateway
address.
5 Select OK repeatedly until the Home screen is displayed.
NOTE:
• Rebooting the machine may be required depending on the settings. When a message displayed
on the screen, follow the message and reboot the machine.
6 Print a configuration report to confirm that the ports are enabled and that TCP/IP is
set up correctly.
NOTE:
• See "Information Pages".
Step 2 Configuring E-mail Environment
1 Press the button.
2 Select DeviceJAppsJEmailJSMTP or select DeviceJConnectivityJSMTP.
3 Set up the e-mail address of the machine.
4 Configure the server settings for sending e-mails.
NOTE:
• To send e-mails, SMTP server settings are required.
5 Select OK.
NOTE:
• Rebooting the machine may be required depending on the settings. When a message displayed
on the screen, follow the message and reboot the machine.
6 Print a configuration report to confirm that the settings of each item.
NOTE:
• See "Information Pages".