334 | Understanding Printer Messages
033-700 Connection timeout.
For fax sending, try again. For fax receiving, ask the sender to check the job status and try
again.
033-701 Check the telephone number and line connection. Check if the destination device support
the fax function.
033-702 Dial the number again, and try the same operation. Contact customer support if this failure
is repeated.
033-703 Try the same operation without using the fax features you specified.
033-710 The document to be sent by polling was deleted.
Store the document again.
033-711 The specified page does not exist, or has a problem. Contact Dell.
033-712 Unable to process because of insufficient memory.
Delete unnecessary data. Contact customer support if this failure is repeated.
033-713 Fax error.
Contact Customer Support if this failure is repeated.
033-716 The folder specified from the sender's machine does not exist.
033-717 The folder passcode specified from the sender's machine is incorrect. Or, the machine
passcode for reception is incorrect.
Inform the correct information to the sender's machine.
033-718 Fax or polling documents do not exist in the folder specified from the sender's machine.
Store fax or polling documents into the folder as necessary.
033-719 The document may be deleted by turning the machine off and then on.
Try the same operation. Contact customer support if this failure is repeated.
033-721 Fax error.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
033-724 Ask the sender to split the data or lower the resolution to reduce the data size.
033-725 Delete unnecessary data from the data storage space.
033-726 The received document was printed with 1 sided printing, because 2 sided printing is not
available for mixed sized documents.
033-728 The auto print formatting of the received fax document was interrupted by a manual print
operation.
The machine will automatically start the auto print job after manual printing completes.
033-731 The auto print processing of the received fax document was interrupted by a manual print
operation. No measure is required.
033-733 Fax error.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
033-734 Because a report job was instructed while preparing to print a received fax, the printing of
the received fax is temporarily suspended.
033-735 Fax error.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
033-736 The forwarding job was interrupted because the data volume exceeded the upper limit.
033-737 Fax error.
Contact customer support if this failure is repeated.
033-738 Received abnormal JBIG data.
No measure is required.
033-740 The printing of the received fax document was interrupted.
Try the same operation again.
Status Code Cause and Remedy
To Next Page
