Dell S3845cdn - Page 388

388 | Maintaining Your Printer
3 Tap - or + to specify the values for left colors (LY, LM, and LC).
4 Tap - or + to specify the values for right colors (RY, RM, and RC).
5 Tap - or + to specify the values for process colors (PY, PM, and PC).
NOTE:
• The registration values are always shown as 0 the next time you enter the menu.
6 Select OK.
7 Repeat steps 2 to 6 for all colors you want to adjust.
8 Select Print Sample.
9 Select Start to print the sample page with the new values.
10 If any of the straightest lines is not at the value of 0, adjust the values again.
11 Select Adjust.
NOTE:
• After printing the sample page, do not turn off the printer until the printer motor has stopped
running.