40 | Connecting and Setting Up Your Printer
To use WEP, WPA2 Personal or Mixed Mode PSK (AES/TKIP):
a Tap the desired encryption type.
b Enter the password in the Enter Password text box.
c Tap Enter.
To use WPA2 Enterprise or Mixed Mode Enterprise (AES/TKIP):
a Tap the desired encryption type.
b Tap Mode to select the authentication method from PEAPv0 MS-CHAPv2,
EAP-TLS, EAP-TTLS/CHAP, EAP-TTLS/PAP or EAP-TTLS/MSCHAPV2.
If you select any authentication method for Mixed Mode Enterprise (AES/TKIP) or
PEAPv0 MS-CHAPv2 for WPA2 Enterprise, proceed to substep c.
If you select EAP-TLS, EAP-TTLS/CHAP, EAP-TTLS/PAP or
EAP-TTLS/MSCHAPV2 for WPA2 Enterprise, proper security certificates need to be
installed using Dell Printer Configuration Web Tool. Follow the instructions
displayed when you select the authentication method.
c Enter the identity in the Enter Identity text box.
d Tap Next.
e Enter the user name in the Enter User Name text box.
f Tap Next.
g Enter the password in the Enter Password text box.
h Tap Enter.
Proceed to step 8.
7 Tap Security to select the encryption type from None or WEP.
If you do not set security for your wireless network:
a Tap None.
To use WEP:
a Tap WEP.
b Enter the password in the Enter Password text box.
c Tap Enter.
8 If the Wi-Fi screen is displayed with the desired access point set to Connected,
wireless LAN connection setting is complete.
Dell Printer Configuration Web Tool
1 Launch the Dell Printer Configuration Web Tool. See "Starting the Dell Printer
Configuration Web Tool".
2 Click Connectivity.
3 Click Wi-Fi under Connections.
4 Click Enable slider to turn it on.
5 Enter the SSID in the SSID text box.
6 Select Ad hoc or Infrastructure in the Network Type drop-down list box.
To Next Page
Loading...
