426 | Jam/Alignment Problems
3 Use print media that is not damp.
Does this solve your problem?
The task is complete. Go to action 4.
4 Fan the print media.
Does this solve your problem?
The task is complete. Go to action 5.
5 Wipe the retard roller in the tray where the multi-feed
occurred with a cloth moistened with water.
Does this solve your problem?
The task is complete. Go to action 6.
6 Decrease the number of print media to be loaded to the
bypass tray.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
To Next Page
Loading...
