| 447
3 Select the Delete button.
• Custom Action cannot be deleted if it is set as default.
4 Select Yes from the confirmation window.
Pre-scanning the images from the printer (Preview)
Preview displays the image before scanning with the parameter set in default Custom
Action. The Preview pane can be set with different measuring units (mm, pixel and inch).
1 Connect the printer and place the document to scan.
2 Install the TWAIN driver and open the TWAIN compatible application to transfer the
image.
3 Select the DELL TWAIN Driver from the TWAIN data source/Scanner selection list
which shows the TWAIN driver UI. The pre-scanned image from the printer will be
displayed in the preview pane. Refer Fig 2 The Dell Twain Driver dialog.
• Printer will scan from ADF if document is available in ADF.
• Printer will scan from Flatbed if there is no document available in the ADF.
4 Set different parameters from Scan settings, Image Options, Rotate and Invert, Crop
and Image Quality and click on Preview button. Image will be displayed on the
Preview pane with selected settings.
Scanning and transferring the image using the TWAIN driver
1 Install the TWAIN driver and open the TWAIN compatible application to transfer the
image.
2 Select the DELL TWAIN Driver from the TWAIN data source/Scanner selection list
which shows the TWAIN driver UI. The pre-scanned image from the printer will be
displayed in the preview pane.
3 Set different parameters from Scan feature settings and click on the Preview button.
To Next Page
Loading...
