54 | Installing Printer Drivers on Linux Computers (CUPS)
For network connections:
a Click Add.
The Add New Printer Configuration dialog box opens.
b Click Connection Wizard.
The Connection Wizard dialog box opens.
c Select Line Printer Daemon (LPD) Protocol from Access Network Printer or
Printserver Box via.
d Type the IP address of the printer in IP Address or Host Name:.
e Select Dell in the Select the printer manufacturer: drop-down menu.
f Click OK.
The Add New Printer Configuration dialog box appears.
g Select Dell Color MFP S3845cdn vXXXX PS [Dell/
Dell_Color_MFP_S3845cdn.ppd.gz] from the Assign Driver list.
• You can specify the printer name in Set Name:.
h Confirm the settings, and click OK.
For USB connections:
a Click Add.
The Add New Printer Configuration dialog box opens.
The printer name is displayed in the Determine Connection list.
b Select Dell Color MFP S3845cdn vXXXX PS [Dell/
Dell_Color_MFP_S3845cdn.ppd.gz] from the Assign Driver list.
• You can specify the printer name in Set Name:.
c Confirm the settings, and click OK.
Printing From the Applications
When you have finished setting up the queue you can print jobs from the applications.
Start the print job from the application, and specify the queue in the print dialog box.
However, sometimes you can print only from the default queue depending on the
application (for example Mozilla). In these cases, before you start printing, set queue you
want to print to as the default queue.
Setting the Default Queue
You can set the default queue when you add the printer.
1 Select ComputerJMore Applications..., and select YaST on the Application Browser.
2 Type the administrator password, and click Continue.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
The Printer Configurations dialog box opens.
4 Click Edit.
A dialog box to modify the specified queue opens.
To Next Page
Loading...
