Dell S3845cdn - Page 70

70 |Device
The address, subnet mask, and gateway address will automatically be set via DHCP.
• BOOTP
The address, subnet mask, and gateway address will automatically be set via BOOTP.
NOTE:
• This is displayed only when this option is configured on Dell Printer Configuration Web Tool.
• STATIC
The address, subnet mask, and gateway address will manually be set.
Host Name
Enter a host name.
IPv4 Address
Displays the IP address.
Gateway Address
Displays the gateway address.
Subnet Mask
Displays the subnet mask.
IPv6
Enable IPv6
Select this to enable the IPv6 mode.
Host Name
Enter a host name.
Link-Local Address
Displays the Link-Local address.
Self-Assigned Address
Displays the self-assigned address.
Manual Address
Allows you to enter an address.
DHCPv6 Configuration
Select a purpose of using DHCPv6.
• Direct by Router
• Address Assignment and Configuration
• Configuration Data