Delta Electronics ASDA-B2 series - Page 254

ASDA-B2 Chapter 7 Servo Parameters
Revision September 2013 7-89
Display
Format:
Decimal
Settings:
Refer to P4-11 for explanation.
Please note that when P2-08 is set to 10, the users cannot reset this parameter.
P4-14
TOF2 Analog Torque Drift Adjustment 2
Address: 041CH
041DH
Operation
Interface:
Keypad / Software Communication
Related Section: N/A
Default: Factory setting
Control
Mode:
ALL
Unit: N/A
Range: 0 ~ 32767
Data Size: 16-bit
Display
Format:
Decimal
Settings:
Refer to P4-11 for explanation.
Please note that when P2-08 is set to 10, the users cannot reset this parameter.
P4-15
COF1
Current Detector Drift Adjustment (V1 phase)
Address: 041EH
041FH
Operation
Interface:
Keypad / Software Communication
Related Section: N/A
Default: Factory setting
Control
Mode:
ALL
Unit: N/A
Range: 0 ~ 32767
Data Size: 16-bit
Display
Format:
Decimal
Settings:
Refer to P4-11 for explanation.
Please note that when P2-08 is set to 10, the users cannot reset this parameter.
P4-16
COF2
Current Detector Drift Adjustment (V2 phase)
Address: 0420H
0421H
Operation
Interface:
Keypad / Software Communication
Related Section: N/A
Default: Factory setting
Control
Mode:
ALL
Unit: N/A
Range: 0 ~ 32767
Data Size: 16-bit
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.