Develop ineo 213 - Page 144

5
Making copies
5-46 ineo 163/213
6 Use the keypad to type in "180" for the width (Y), and then press the
[OK] key.
– The paper width (Y) can be set between 90 mm and 297 mm.
The BYPASS PAPER SETTING menu appears again.
7 Check that "MEDIA: PLAIN" appears in the third line of the screen.
– If any paper type setting other than that for plain paper is selected,
select "MEDIA", and then select "PLAIN".
8 Press the [+] or [,] key until "RETURN" is selected, and then press the
[OK] key.
The main screen appears.
BYPASS PAPER SIZE
Y=180( 90-297)
X=250(140-432) x
BYPASS MEDIA TYPE
TRANSPARENCY
PLAIN
CARD
BYPASS PAPER SETTING
MEDIA:PLAIN
RETURN
SIZE:[250/180]