Develop ineo 213 - Page 143

Making copies
5
ineo 163/213 5-45
4 Press the [+] or [,] key until "SIZE INPUT" is selected, and then press
the [OK] key.
5 Use the keypad to type in "250" for the length (X), and then press the
[OK] key.
– The paper length (X) can be set between 140 mm and 432 mm.
Refer to the diagram at the right and
be sure to specify the paper width
and length measurements correctly.
BYPASS PAPER SIZE
SIZE INPUT
INCH
MEMORY1:[216/279]
BYPASS PAPER SIZE
Y=279( 90-297)
X=250(140-432) x
length (X)
width (Y)