30 | SEVEN
™
CONTINUOUS GLUCOSE MONITORING SYSTEM
SECTION 2
STARTING YOUR SEVEN
CONTINUOUS GLUCOSE MONITORING SESSION
To use your Seven Continuous Glucose Monitoring System you will need a Sensor, a
Transmitter, and a Receiver. You will also need a blood glucose meter and test strips for
calibration. Once inserted and calibrated, your Sensor will continuously measure and
display your glucose readings for up to 7 days.
At the end of the 2-hour Start-Up Period the Seven System will ask for 2 calibration BG
readings. ese two fingersticks must be taken with a BG meter and uploaded to your
Receiver. Once calibrated, your Receiver will display glucose readings, trend graphs, and
provide low and high glucose alerts and a low glucose ALARM.
To Next Page
Loading...
