34 | SEVEN
™
CONTINUOUS GLUCOSE MONITORING SYSTEM
2.2.1 REMOVING THE SEVEN SENSOR FROM ITS PACKAGING
Carefully remove your Sensor from its packaging and examine it to make sure it is not •
damaged.
e Applicator is a single use, disposable unit. e safety lock prevents you from
•
accidentally releasing the needle before you are ready.
QUICK TIP
Before you insert a new Sensor, place your Transmitter next to your Receiver for at least five
minutes to make sure they are communicating. e Receiver will display the Antenna Symbol
in the bottom right hand corner of the Trend Screens.
To Next Page
Loading...
