38 | SEVEN
™
CONTINUOUS GLUCOSE MONITORING SYSTEM
Seven Applicator
Remove the Applicator by pressing the release tabs on the sides of the Sensor Pod. 3.
Once you feel the back tabs open, pull off the Applicator so that only the Sensor Pod
remains adhered to your body.
Seven Sensor Pod
Sensor now inserted
Press on the
Release Tabs
After you have pushed the plunger down, pull the collar back until you hear a click or 2.
cannot pull back any further. is step pulls the needle back into the Applicator and
leaves the Sensor underneath your skin.
Pull up
Needle now removed/
Sensor inserted
To Next Page
Loading...
