Seven
™
System User’s Guide | 69
4.6 MISSING SEVEN GLUCOSE INFORMATION GLUCOSE DATA GAPS
At times your Seven System will not display glucose information or provide Alerts/
ALARMs. ese Glucose Data Gaps can happen when:
e Transmitter and Receiver are out of range.1.
e Receiver does not understand the Sensor signal.2.
e Seven System needs another BG fingerstick reading for calibration because the 3.
Sensor readings do not match your blood glucose meter readings.
Reasons for “Glucose Data Gaps” and what to do to receive new Seven System readings
are described in the next Sections.
WARNING
is device is not designed to replace a blood glucose meter. During Glucose Data
•
Gaps rely on your blood glucose meter.
Symptoms related to low or high blood glucose levels should not be ignored. If
•
you have symptoms of low or high glucose confirm them using your blood glucose
meter.