Diesse cube 30 touch - Page 46

Rev. 2.3
CUBE 30 TOUCH | USER MANUAL
46
• the lot number (XXX)
• the expiration date (DD / MM / YY)
• the range of acceptability (MIN / MAX)
• The outcome of the control test (FAIL / PASS)
Figure 45 - Print receipt
The printout also contains the following information:
“§”: manual insertion of the sample (barcode not read by the instrument) or exclusion of
the barcode reading by the user (“SKIP”, “SKIP ALL”), see POS NUM 08 and 09 samples
“+”: sample inserted by the random-access mode (mixing was not performed by the
instrument), see sample in position number 13
DIESSE
Diagnostica senese
CUBE 30 TOUCH - V 2.01.00
SN 2021 – 06 – 1999
ReD STRUMENTI
Date/Time: 11/01/2022 14:28
Cycle 9
Temperature: 23.1°C ON
User RSUU
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
POS ID W
NUM (mm/h)
01 20056789………… 5
02 20056790………… 6
03 ……………….. 8
04 10046282………… S LOW
05 10073422………… S 25
06 39008745………… M 2
07 39007656………… P 7
08 874537246……….. § HIGH
09 00956347………… § >140
10 683909757……….. ERR
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
11 58033028078.. 61
QC TYPE: PATOLOGICO
NAME: DIESSE_QC
LOT N.: 803
EXP. DATE: 31/07/2023
RANGE: MIN: 28
MAX: 78
QC RESULT: PASS
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
12 47203001014 5
QC TYPE: NORMALE
NAME: DIESSE_QC
LOT N.: 720
EXP. DATE: 30/11/2022
RANGE: MIN: 1
MAX: 14
QC RESULT: PASS
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
13+ 0300589674......... 35!
Figure 46