Digi Connect EZ Mini User Manual

User authentication Terminal Access Controller Access-Control System Plus (TACACS+)
Digi Connect EZ Mini User Guide
534
3. (Optional) Prevent other authentication methods from being used if TACACS+ authentication
fails. Other authentication methods will only be used if the TACACS+ server is unavailable.
(config)> auth tacacs+ authoritative true
(config)>
4. (Optional) Configure the group_attribute. This is the name of the attribute used in the
TACACS+ server's configuration to identify the Connect EZ authentication group or groups that
the user is a member of. For example, in TACACS+ user configuration, the group attribute in the
sample tac_plus.conf file is groupname, which is also the default setting for the group_
attribute in the Connect EZ configuration.
(config)> auth tacacs+ group_attribute attribute-name
(config)>
5. (Optional) Configure the type of service. This is the value of the service attribute in the the
TACACS+ server's configuration. For example, in TACACS+ user configuration, the value of the
service attribute in the sample tac_plus.conf file is system, which is also the default setting in
the Connect EZ configuration.
(config)> auth tacacs+ service service-name
(config)>
6. (Optional) Enable command authorization, which instructs the device to communicate with the
TACACS+ server to determine if the user is authorized to execute a specific command. Only the
first configured TACACS+ server will be used for command authorization.
(config)> auth tacacs+ command_authorization true
(config)>
7. (Optional) Enable command accounting, which instructs the device to communicate with the
TACACS+ server to log commands that the user executes. Only the first configured TACACS+
server will be used for command accounting.
(config)> auth tacacs+ command_accounting true
(config)>
8. Add a TACACS+ server:
a. Add the server:
(config)> add auth tacacs+ server end
(config auth tacacs+ server 0)>
b. Enter the TACACS+ server's IP address or hostname:
(config auth tacacs+ server 0)> hostname hostname|ip-address
(config auth tacacs+ server 0)>
c. (Optional) Change the default port setting to the appropriate port:
(config auth tacacs+ server 0)> port port
(config auth tacacs+ server 0)>

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English