Digi Connect EZ Mini User Manual

System administration Erase device configuration and reset to factory defaults
Digi Connect EZ Mini User Guide
618
c. (Optional) Reset the default password for the admin account. See Change the default
password for the admin user for further information.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the following:
> system factory-erase
3. After resetting the device:
a. Connect to the Connect EZ by using the serial port or by using an Ethernet cable to
connect the Connect EZ ETH2 port to your PC.
b. Log into the Connect EZ:
User name: Use the default user name: admin.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
c. (Optional) Reset the default password for the admin account. See Change the default
password for the admin user for further information.
Reset the device by using the RESET button.
1. Locate the RESET button on your device.
2. Press the RESET button perform a device reset. The RESET button has the following modes:
n Configuration reset:
l Press and release the RESET button .
l The device reboots automatically and resets to factory defaults. This does not
remove any automatically generated certificates and keys.
n Full device reset:
l After the device reboots from the first button press, immediately press and release
the RESET button again.
l The device reboots again and resets to factory defaults, as well as also removing
generated certificates and keys.
3. After resetting the device:
a. Connect to the Connect EZ by using the serial port or by using an Ethernet cable to
connect the Connect EZ ETH2 port to your PC.
b. Log into the Connect EZ:
User name: Use the default user name: admin.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
c. (Optional) Reset the default password for the admin account. See Change the default
password for the admin user for further information.

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English