Frame descriptions AT Command frame - 0x08
XBee®-PRO 900HP/XSC RF Modules
122
Frame data fields Offset Example
Start delimiter 0 0x7E
Length MSB 1 0x00
LSB 2 0x11
Frame type 3 0x00
Frame ID 4 0x01
Destination address MSB 5 0x00
6 0x13
7 0xA2
8 0x00
9 0x40
10 0x52
11 0xC5
LSB 12 0x07
Options 13 0x00
RF data 14 0x54
15 0x78
16 0x44
17 0x61
18 0x74
19 0x61
Checksum 20 0xA5
AT Command frame - 0x08
Description
Use this frame to query or set device parameters on the local device. This API command applies
changes after running the command. You can query parameter values by sending the 0x08 AT
Command frame with no parameter value field (the two-byte AT command is immediately followed by
the frame checksum).
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
To Next Page
Loading...
Need help?
General
