S3B hardware certifications Agency certifications - United States
XBee®-PRO 900HP/XSC RF Modules 244
not
FCC-approved antennas (900 MHz)
The antennas in the tables below have been approved for use with this device. Digi does not carry all of these antenna variants. Contact Digi Sales for
available antennas.
All antenna part numbers followed by an asterisk (*) are not available from Digi. Consult with an antenna manufacturer for an equivalent option.
Antennas approved for use with the XBee-PRO 900HP RF Module
Part number Type Connector Gain Application
Cable loss or power reduction for S3B
device
Omni-directional antennas
A09-F0
Fiberglass Base Station
RPN 0 dBi Fixed 0dB
A09-F1
Fiberglass Base Station
RPN 1.0 dBi Fixed 0dB
A09-F2
Fiberglass Base Station
RPN 2.1 dBi Fixed 0dB
A09-F3
Fiberglass Base Station
RPN 3.1dBi Fixed 0dB
A09-F4
Fiberglass Base Station
RPN 4.1 dBi Fixed 0dB
A09-F5
Fiberglass Base Station
RPN 5.1 dBi Fixed 0dB
A09-F6
Fiberglass Base Station
RPN 6.1 dBi Fixed 0dB
A09-F7
Fiberglass Base Station
RPN 7.1 dBi Fixed 0dB
A09-F8
Fiberglass Base Station
RPN 8.1 dBi Fixed 0dB
A09-F9 Base Station RPSMAF 9.2dBi Fixed 0dB
A09-W7 Wire Base Station RPN 7.1 dBi Fixed 0dB
A09-F0
Fiberglass Base Station
RPSMA 0 dBi Fixed 0dB
To Next Page
Loading...
Need help?
General
