Digitronic CamCon DC50 - Pin Allocation of the Incremental Measuring System; Pin Allocation of the Inputs; Pin Allocation of the Outputs

Digitronic Digital Cam Switch Unit
Automationsanlagen GmbH CamCon DC50/51
4.1.3. Pin allocation of the incremental measuring system
Pin 11: 0V voltage supply for theincremental measuring system (encoder)
Pin 12: A Imp. (+)
Pin 13: A Imp. (-)
Pin 14: B Imp. (+)
Pin 15: B Imp. (-)
Pin 16: +24V DC voltage supply for the incremental measuring system (encoder)
Pin 17: C1 Imp. (+)
Pin 18: C1 Imp. (-)
Pin 19: C2 Imp. (+)
Pin 20: C2 Imp. (-)
4.1.4. Pin allocation of the inputs
Pin 21: 0V signal mass for inputs
Pin 22: Input 1
Pin 23: Input 2
Pin 24: Input 3
Pin 25: Input 4
Pin 26: Input 5
Pin 27: Input 6
Pin 28: Input 7
Pin 29: Input 8
Pin 30: +24V DC voltage supply for the outputs 1 to 16
Pin 31: 0V signal mass for inputs
Pin 32: Input 9
Pin 33: Input 10
Pin 34: Input 11
Pin 35: Input 12
Pin 36: Input 13
Pin 37: Input 14
Pin 38: Input 15
Pin 39: Input 16
Pin 40: +24V DC voltage supply for the outputs 1 to 16
4.1.5. Pin allocation of the outputs
Pin 41: 0V voltage supply for the outputs 1 to 16
Pin 42: Output 1
Pin 43: Output 2
Pin 44: Output 3
Pin 45: Output 4
Pin 46: Output 5
Pin 47: Output 6
Pin 48: Output 7
Pin 49: Output 8
Pin 50: +24V DC voltage supply for the outputs 1 to 16
Pin 51: 0V voltage supply for the outputs 1 to 16
Pin 52: Output 9
Pin 53: Output 10
Pin 54: Output 11
Pin 55: Output 12
Pin 56: Output 13
Pin 57: Output 14
Pin 58: Output 15
Pin 59: Output 16
Pin 60: +24V DC voltage supply for outputs 1 to 16
,Version from: Aug. 04 Page: 16
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com