Digitronic Digital Cam Switch Unit
Automationsanlagen GmbH CamCon DC50/51
5.8. Text input
With menu points, in which texts have to be implemented, the and keys function together with
the and keys like a coordinate control. You select the desired position for the first character,
using the and keys. Then you can choose the character with the and keys, by going up
and down through the alphabet or the ASCII characters. If you move the cursor to the right with the
key, character entered prior to this will appear in the new position of the cursor, simplifying making
repeated inputs of the same character.
If you have made an error you can go back to the wrong character to correct it, using the key or the
key. This will cause the other characters to become erased. To abandon the input press the
key.
Attention: The software for the text input at the CamCon has changed since EPROMS of 1/97. The
selection of desired characters is now realized with keys and . With keys and
you can now position the cursor anywhere in the previously entered text. You can
overwrite characters, insert characters by pressing the key or delete characters with
keys or .
Note: The text input is also possible directly via PC.
,Version from: Aug. 04 Page: 27
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
To Next Page
Loading...
