Digitronic Digital Cam Switch Unit
Automationsanlagen GmbH CamCon DC50/51
Pin 61: 0V voltage supply for the outputs 17 to 32
Pin 62: Output 17
Pin 63: Output 18
Pin 64: Output 19
Pin 65: Output 20
Pin 66: Output 21
Pin 67: Output 22
Pin 68: Output 23
Pin 69: Output 24
Pin 70: +24V DC voltage supply for the outputs 17 to 32
Pin 71: 0V voltage supply for the outputs 17 to 32
Pin 72: Output 25
Pin 73: Output 26
Pin 74: Output 27
Pin 75: Output 28
Pin 76: Output 29
Pin 77: Output 30
Pin 78: Output 31
Pin 79: Output 32
Pin 80: +24V DC voltage supply for the outputs 17 to 32
4.1.6. Pin allocation of the voltage supply
Pin 81: 0V voltage supply for the CPU
Pin 82: 0V voltage supply for the CPU
Pin 83: +24V DC voltage supply for the CPU
Pin 84: +24V DC voltage supply for the CPU
Attention : Pins 30, 40, 50 and 60 are connected to each other.
Pins 1, 11, 21, 31, 41, 51, 61, 71, 81 and 82 are connected to each other.
4.1.7. Pin allocation of the serial interface
When you order the CamCon you can choose the type of the serial interfaec between RS232 or
RS485. Wiring and connector allocation are different for each type of the serial interface.
4.1.7.1. Pin allocation of the serial RS232 interface
DSUB 9 pinboard: RS232 Interface for PC attachment (max. 15m cable length)
Pin 1,4 Do not connect !
Pin 2 TXD
Pin 3 RXD
Pin 5 Mass
Pin 6-9 N.C.
,Version from: Aug. 04 Page: 17
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
To Next Page
Loading...