Digitronic Digital Cam Switch Unit
Automationsanlagen GmbH CamCon DC50/51
7.4.1.7. Deleting the special measuring system
The special configuration of the measuring system can be removed as follows:
1. Select the menu point "Measuring system" in the
configuration menu. The following menu is
displayed:
2 Select the special measuring system with the
and keys.
3. Press the key, and the following question is
displayed:
4. Move the cursor to "yes" with the key and
confirm your choice by pressing the key.
This deletes all settings of the special measuring system.
,Version from: Aug. 04 Page: 54
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
To Next Page
Loading...
