Digitronic Digital Cam Switch Unit
Automationsanlagen GmbH CamCon DC50/51
- Factor of the speed display
- Display format of the speed display
- 100% value for the speed display
- Accuracy of the speed display
- Display menu of the display type / Input for the
display change.
- Cable length of the measuring system and the
external upgrade
- Set planned value of the cycle time
- Cycle time need by CamCon
- Temperature in the encasement of CamCon
- Output number of the security output
- Format of the displayed actual value
- Output number of the F / R output
- Output number of the stand still output
- Hysteresis for the recognition of the stand still
speed
- Analog speed output "yes/no"
- Number of analog cam outputs
- Number of inputs and outputs
- Number of outputs w. speed compensation
- Input number for keyboard locking
- Input number of error aknowledgement
- Input number for output enable
- Number of externally selectable programs
- Input number of the first input for the external
program selection
- Change mode of the program selection
- Configuration of physcial hardware in- and
outputs
- Configuration towards the CP-16-module
- (Profibus, Interbus, Can-Bus).
- PLC logic module configuration
- PLC-Logic-module ON/OFF
- Number of M-Registers
- Number of X-Registers
- Number of counters and times
- Number of virtual inputs
- Number of special inputs.
- Number of shift registers with speed
compensation
,Version from: Aug. 04 Page: 77
To Next Page
Loading...
