Dinstar UC2000 - Supplementary Services; Physical Interfaces; Fxs;Fxo

UC2000 User Manual
5
Copyright @ 2011-2015 Dinstar
 Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
 FAX: T.38 and Pass-through
 NAT: STUN/UPnP
 DTMF: RFC2833/Signal/Inband
1.4.4 Supplementary Services
 Call Waiting
 Call Transfer (Blind & Attended)
 Call Forwarding （Unconditional/Busy/No Reply）
 Call Holding
 Call Pickup
 No Disturbing
 Hotline
1.4.5 Physical Interfaces
 12 Expansion Slots
 Expansion Boards:
2 FXS Ports per Board
2 FXO Ports per Board
1 GSM Channel per Board
1 CDMA Channel per Board
1 WCDMA Channel per Board
1 BRI Port per Board
2 E1/T1 Ports per Board
1 Radio Port per Board
1 E&M port per Board
 Ethernet Interfaces
2*10/100 Based-T RJ45
 Console
1*RS232, 115200bps
1.4.6 FXS/FXO
 Connector: RJ11
 Caller ID: Bellcore Type 1&2, ETSI,BT,NTT and DTMF
 Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone, Detection
 Polarity Reversal
 Flash-hook Detection