Dinstar UC2000 - 4 Configurations on Web Interface; 4.1 How to Log in Web Interface

UC2000 User Manual
13
Copyright @ 2011-2015 Dinstar
3.5 Description of Feature Codes
Code
Corresponding Function
*158
Dial *158 to inquiry IP address of UC2000
*114
Dial *114 to inquiry phone number
*150*
Dial *150*1 to set IP address as static IP address; dial *150*2 to set IP address as DHCP IP
address
*152*
Dial *152*192*168*1*10# to set IPv4 address as 192.168.1.10
*156*
Dial *156*192*168*1*1# to set IPv4 gateway as 192.168.1.1
*153*
Dial *153*255*255*0*0*# to set IPv4 netmask as 255.255.0.0
*51
Dial *51 to enable the call waiting service
*50
Dial *50 to disable the call waiting service
*1
Example: Dial *18000, and you can blind transfer to the extension number 8000
*2
Example: Dial *28000#, and you can attended transfer to the extension number 8000
*72*
Enable unconditional call forwarding service. Example: Dial *72*8000, and calls will be
unconditionally forwarded to extension number 8000
*73
Disable unconditional call forwarding service
*90*
Enable the call forwarding on busy service. Example: Dial *90*8000, and calls will be forwarded
to extension number 8000 when the called number is on busy
*91
Disable the call forwarding on busy service
*92*
Enable the call forwarding on no reply service. Example: Dial *92*8000, and calls will be
forwarded to extension number 8000 when there is no reply from the called number
*93
Disable the call forwarding on no reply service
*78
Enable the ‘Do Not Disturb’ service
*79
Disable the ‘Do Not Disturb’ service
**
Pick up the ringing extension which is in the same ringgroup. Example: Dial**8000, and you can
take the incoming call of extension number 8000
Flash Button/
Flash Hook
By pressing the flash button or flash hook, a person can switch between the current call and the
new incoming call.
Note:
 As for the GSM userboard and the CDMA userboard, use a mobile phone to call the corresponding
SIM card number first (aimed to establish connection between the mobile phone and the UC2000), and