Copyright @ 2011-2015 Dinstar
PPPoE:
PPPoE is an acronym for point-to-point protocol over Ethernet, which relies on two widely accepted
standards: PPP and Ethernet. PPPoE is a specification for connecting the users on an Ethernet to
the Internet through a common broadband medium, such as a single DSL line, wireless device or
cable modem. PPPOE IP address refers to IP address assigned through the PPPoE protocol.
If you choose PPPoE, you need to fill in to fill in the following information:
Username: the account name of PPPoE
Password: the password of PPPoE
Server Name: the name of the server where PPPoE is placed
Note: After the configurations are completed, you need to reboot the UC2000 device for the network
changes to take effect.
4.5.2 Access Control
The access ports of Web, Telnet and SSH can be configured on the Access Control interface. Web supports
http and https, while SSH supports OAuth 2.0 protocol.
To Next Page
Loading...
