Dinstar UC2000 - Page 39

UC2000 User Manual
34
Copyright @ 2011-2015 Dinstar
Static IP Address:
Static IP address is a semi-permanent IP address and remains associated with a single computer or other
device over an extended period of time. This differs from a dynamic IP address, which is assigned ad
hoc at the start of each session, normally changing from one session to the next.
If you choose static IP address, you need to fill in the following information:
 IPv4 Address: the IP address of the FE0/FE1 port of the UC2000 ;
 IPv4 Netmask: the netmask of the router connected the UC2000;
 IPv4 Gateway: the IP address of the router connected the UC2000;
 Use custom DNS server: the IP address of the DNS server