Dinstar UC2000 - GSM;CDMA Trunk; Call Control

UC2000 User Manual
55
Copyright @ 2011-2015 Dinstar
4.8.3 GSM/CDMA Trunk
GSM/CDMA trunk interconnects the GSM/CDMA wireless network with UC2000. Calls from the
GSM/CDMA wireless network can come into UC2000 and calls can go out from UC2000 to search mobile
numbers under the GSM/CDMA wireless network.
Click , and you will see the following interface:
Parameter
Explanation
Extension
The extension account of the GSM/CDMA port, which is used to register
Status
If it is enabled, it means the GSM/CDMA trunk is available; otherwise, the
GSM/CDMA trunk is unavailable
Autodial Number
The autodial number for incoming calls through GSM/CDMA port
Register to SIP Server
Whether to register the GSM/CDMA extension account to SIP server
SMS Encoding
uc s2 or 7bit
SMS Center Number
The SMS center number of SIM card provider
Pin Code
The Pin code of SIM card
4.9 Call Control
This section is to configure routes or route groups for incoming and outgoing calls through UC2000, as
well as IVR, SMS, fax and call-related security.