ICS-90 Ion Chromatography System
Index-2 Doc. 031851-05 12/04
Component mounting panel, 2-7
Columns, 2-11
DS5 Detection Stabilizer, 2-7
MMS III suppressor, 2-9
Pressure transducer, 2-9
Prime valve, 2-11
Pump, 2-11
Computer
Connecting to the ICS-90, B-6
Unpacking, B-4
Conductivity, 2-17
Causes of high conductivity, D-3
Temperature effect, 2-8
Conductivity cell, 2-7
See also DS5 Detection Stabilizer
Control panel
See ICS-90 Control panel (Chromeleon)
D
Danger icon, 1-5 – 1-6
Data
Backing up, D-2
Deleting, D-2
DCR
See Displacement chemical regeneration
Decibel level, A-1
Delay volume specifications
System total, A-4
Detector specifications
Auto offset, A-4
Cell drive, A-4
Control and data evaluation, A-4
Linearity, A-4
Range, A-4
Temperature compensation, A-4
Diagnostics, 5-1, 5-3
Dimensions, A-1
Displacement chemical regeneration, 2-13
Dongle, B-8, B-10
DS5 Detection Stabilizer, 2-7
Calibrating, 5-6
High cell output, 4-9
No response, 4-9
Replacing, 5-19
DS5 Detection Stabilizer specifications
Active volume, A-4
Cell body, A-4
Electrodes, A-4
Maximum pressure, A-4
Dummy cell, 4-9, 5-3
E
ECD
See Electrochemical detector conductivity
Elapsed time, 2-17
Electrical specifications
Fuses, A-1
Main power, A-1
Electrochemical detector conductivity, 5-2,
B-13
See also Conductivity
Eluent, 2-3
Delivery process, 1-1
Preparing, 3-1
Pressurizing the reservoir, 3-2
When to remake, D-2
Eluent reservoir, 2-3
Pressurization, 3-2, B-25
Environmental specifications
Gas pressure, A-2
Humidity, A-2
Operating pressure, A-2
Operating temperature, A-2
Equilibration time, 3-7
Error conditions, 4-1
F
Facility requirements, B-1
Fittings
Leaking, 4-4
Replacing, 5-8
Requirements, 5-8
To Next Page
Loading...
