Dish Network 500 - Page 81

Page 77
Control Other Devices with the Remote
Mute Button
Press this button to turn the sound off or on.
Volume Button
Press this button to raise (+) or lower (-) the volume.
Up/Down Arrow Buttons
Use these buttons to change channels on the tuner or
amplifier.
Select Button
This button works as the INPUT SELECT button for the tuner
or amplifier.
Other Remote Control Features
Switch Between TV and Device Volume Control
When you set up the remote to control a television, the MUTE and VOLUME
buttons control the TV volume. However, if you use the AUX mode to control a
tuner or amplifier and the device has a volume setting, you can set up the
remote to control the device’s volume instead of the TV volume.
To set the remote to control the device’s volume:
1. Press and hold the AUX mode button for three seconds, and then let
go of it.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME button.
4. Press the 0 number button.
5. Press the POUND(#) button. The Aux mode button flashes three
times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the VOLUME button.
The device’s volume changes and the AUX mode button lights
instead of the TV mode button.