Fuel
System
DODGE
Turbo Diesel
Fuel
System
Replacement Procedures
Page
14-25
Injector Bore Brush
Clean
the injector nozzle bore
with
a bore brush.
Assemble
the injector and new copper
sealing
washer.
Note:
Use Only One Copper Washer.
24mm
Deep Well Socket
Caution:
Align the Injector's protrusion
with
the notch In
the bore.
Tighten the injector retainer nut.
Torque Value: 60 N-m [44 ft-lbs]
Note:
After tightening the injector be sure to push the o-ring
Into
the groove.
To Next Page